ㅤ ㅤ

Домашній → Каталог → Пароконденсатне обладнання → Системи та комплексні рішення для пари та конденсату → Direct Steam Injection Humidifier ADCA DSH (Single-tube humidifier)

Valsteam ADCA

Direct Steam Injection Humidifier ADCA DSH (Single-tube humidifier)

Специфікація

Function

Designed to ensure highly efficient and moisture free steam injection in air ducts and AHU for humidification purposes.
Application

Saturated steam
Number of tubes

Single-tube
Material

Full stainless steel construction
Max. allowable pressure

Tube humidifier – 12 bar (PN 16),
Injection tube – 4 bar (PN 6)
Max. allowable temperature

Tube humidifier – 250 ºC,
Injection tube – 152 ºC
Max. humidification load

DSH10 – up to 173 kg/h,
DSH25 – up to 397 kg/h,
DSH30 – up to 662 kg/h
Insertion length

DSH10 – Min.: 180 / Max.: ≥ 1001 mm,
DSH25 – Min.: 330 / Max.: ≥ 1251 mm,
DSH30 – Min.: 980 / Max.: ≥ 1551 mm
Max. duct height

DSH10 – Up to 900 mm,
DSH25 – Up to 1100 mm,
DSH30 – Up to 1300 mm
Connections

Female threaded ISO 7 Rp (NPT on request) PN16,
Flanged EN 1092-1 PN 16,
Flanged ASME B16.5 Class 150 on request

Direct Steam Injection Humidifier ADCA DSH (Single-tube humidifier)

Код товару: DSH101000I3AA

Доступно під запит

Ціна відповідно до конфігурації

Виберіть свою конфігурацію

Див. Вся конфігурація

Реф.#.

без ПДВ

(ОРІЄНТОВНА ЦІНА)

Кількість

-

+

Немає готових рішень

Вибрана конфігурація додана до кошика

Перейдіть до запиту на пропозицію

Direct Steam Injection Humidifier ADCA DSH (Single-tube humidifier)

The ADCA DSH series of direct steam injection humidifiers are designed to ensure highly efficient and moisture free steam injection in air ducts and AHU for humidification purposes. These units are completely manufactured from corrosion resistant stainless steel, and are available as plug and play packaged solutions or alternatively as individual components to be incorporated into humidification systems. Each humidifier is manufactured as a bespoke solution to meet flow requirements and duct design with single or multiple injection tube design.

OPERATION

Steam moves in the supply line passing through a strainer to remove solid particles and, if necessary, through a pressure reducing valve to reduce it to humidification pressure (generally around 1 to 2 barg). Steam then passes through a S16TSS centrifugal humidity separator which removes any remaining finer particulate matter and most moisture content. The separator special design dries the steam which is injected and also the steam which feeds the heating chamber keeping heating temperatures stable. As steam leaves the humidity separator and passes through the jacketed injection tubes it is kept at a constant temperature, preventing condensation to be carried over with the steam.
Condensate collects on the bottom of the separator and is removed from the system at saturated temperature via a FLT float and thermostatic steam trap. Condensate which forms inside the injection tube heating chamber is removed by means of one or multiple steam traps depending on the case.
An ADCATrol globe control valve equipped with a fail-safe electric or pneumatic actuator provides accurate modulation of flow and, thus, precise humidity control.

MAIN FEATURES

Quiet and efficient.

Complete stainless steel construction.

Bespoke injection tubes to meet flow requirements and duct design.

Fully jacketed injection tubes providing moisture free steam injection.

Use of ADCA highly efficient and proven centrifugal separator specially designed for the application.

OPTIONS

Fully assembled in a plug and play package.

Sanitary design to ADCAPure standards.

← Back to list

The selected configuration has been added to the cart

Перейти до візка

Дякуємо за ваш запит, наш менеджер скоро зв’яжеться з вами!

Дякуємо за ваш запит, наш менеджер скоро зв’яжеться з вами!

ㅤ