ㅤ ㅤ
Напишіть нам request@prima-steam.com
Україна: з 9:00 до 17:00 +38 (044) 353-55-52
Мова

УКР

Публічна оферта Prima Steam – Надійний постачальник обладнання для вашого контролю потоку!
Домашній → Каталог → Пароконденсатне обладнання → Системи та комплексні рішення для пари та конденсату → ADCAMat® Electric condensate recovery unit ADCA ECRUV (vertical design)
Valsteam ADCA
ADCAMat® Electric condensate recovery unit ADCA ECRUV (vertical design)

Специфікація

  • Application

    hot condensate

  • Material

    Condensate vessel material – Carbon steel,
    Metal frame – Fabricated carbon steel,
    Pipework, valves and ancillaries – Carbon steel

  • Max. operating temperature

    hot condensate up to 98 ºC

  • Vessel capacity

    150 liters,
    225 liters

  • Delivery head

    10 metres

  • Max. flow rate

    2 m³/h (with 150 L vessel),
    4 m³/h (with 225 L vessel),
    *mentioned flow at the delivery head in 10 meters

  • Electric pumps

    Single pump (3~ 380 – 415 V, 50 Hz)

  • Control panel

    Control panel, conductive switches and wiring

ADCAMat® Electric condensate recovery unit ADCA ECRUV (vertical design)

Код товару: ECV150SS2T10SS

Доступно під запит

Ціна відповідно до конфігурації

Виберіть свою конфігурацію
Див. Вся конфігурація
Реф.#.
без ПДВ
(ОРІЄНТОВНА ЦІНА)

Кількість

-
+

Немає готових рішень

Вибрана конфігурація додана до кошика

Перейдіть до запиту на пропозицію

ADCAMat® Electric condensate recovery unit ADCA ECRUV (vertical design)

The ADCAMat ECRUV series electric condensate recovery units are recommended in the transfer of high-temperature water such as hot condensate, to a higher elevation or pressure. This condensate is usually used as boiler feedwater. The standard models are prepared for flows up to 4 m³/h. The units are composed of a vertical condensate vessel (receiver), a metallic support frame, electric pump, level controls, valves, prewired control panel and pipework for connections between the different elements of the units.

OPERATION

The condensate is brought into the vessel through the inlet connections, with stainless steel sparge pipes, located on the top of the vessel. As the condensate level rises it will trigger the level control system to start the pumping process.

MAIN FEATURES

Condensate vessel – Completely manufactured from carbon steel or AISI 316 stainless steel, with inlet connections, overflow, air vents, drain, pump feeding outlets and a set of conductive level switches.
Metal frame – Manufactured from structural steel (sandblasted and painted) or stainless steel (sandblasted).
Pump – Manufactured from stainless steel, capable of handling hot condensate up to 98 ºC and designed for low NPSH.
Control panel – Metal enclosure rated to IP 65 or higher. Features pump fault indication, level alarms, operating mode selector switch and voltfree telemetry terminals for remote stats. The unit requires a 3 phase, 380-415 V AC, 50 Hz power supply.

← Back to list

The selected configuration has been added to the cart

Перейти до візка

Дякуємо за ваш запит, наш менеджер скоро зв’яжеться з вами!

Дякуємо за ваш запит, наш менеджер скоро зв’яжеться з вами!

ㅤ