ㅤ ㅤ

Dom → Katalog → Urządzenia parowe → Hot condensate cooler ADCA HCC/SS

Valsteam ADCA

Specyfikacje

Function

Cooling device that allows the mixing of hot condensate with a lower temperature condensate, avoiding hammering.
Use

Condensate discharge downstream of steam traps
Body material

HCC3SS and HCC10SS – stainless steel body and coil
Max. operating pressure

12,7 bar (Body design PN16),
29,9 bar (Body design PN40)
Max. operating temperature

250°C (PN16),
300°C (PN40)
Flow rate capacity

HCC3SS – up to 300 kg/h,
HCC10SS – up to 500 kg/h
Supports

Installation supports on body (without supporting feet)
Connections

Flanged EN 1092-1 PN 16 and PN 40,
Flanged ASME B16.5 Class 150 or 300, on request

Hot condensate cooler ADCA HCC/SS

Kod produktu: A.67.6103.000

Dostępne na prośbę

Cena zgodnie z konfiguracją

Wybierz konfigurację

Zobacz całą konfigurację

Ref.#.

Bez VAT

(ORIENTACYJNA CENA)

Ilość

Brak gotowych rozwiązan

Wybrana konfiguracja została dodana do koszyka

Przejdź do prośby o cytat

Hot condensate cooler ADCA HCC

The HCC is a cooling device that allows the mixing of hot condensate with a lower temperature condensate, avoiding hammering.
Condensate discharge from higher pressure lines (drip points, for instance) are often connected to low pressure condensate lines, with lower temperature. This sudden pressure drop will convert the sensible heat difference between the two fluid conditions into latent heat, generating flash steam.
Flash steam has a much bigger volume than condensate and, when mixed with the cold condensate, it will cool suddenly, imploding and causing hammering (noise and vibration).
The HCC avoids this phenomenon, since it slowly cools down the hot condensate which circulates inside a coil, surrounded by cold condensate which circulates according to the thermo-siphon physical laws.