Dom Katalog

Centrifugal and baffle separators remove moisture from steam and compressed air pipelines. Steam or compressed air and pass through the separator and, as a result of centrifugal forces, impacts and swirling effects are separated from the fluid or compressed air.

Separatory wilgoci

Automatic mechanical pumps specifically designed to remove and recover condensate. Self-contained units using steam or other pressurised gas as their motive power.

Pompy kondensatu i stacje

Sample coolers are specially designed to cool samples of boiler water or steam for analysis. These devices may be used for boiler water analysis and other sampling or cooling applications compatible.

Chłodniczki poboru próbek

Steam injectors designed for rapid heating of still or flowing mediums, inside basins and vessels. Steam enters through the inlet connection, passes along the center of the device and mixes with the cool medium, which is drawn in through radial holes.

Inżektory pary

Heat exchange solutions for steam and hot water application. Efficiently transfer and reuse heat energy from a primary heat source to a secondary fluid.

Wymienniki ciepła płaszczowo-rurowe i płytowe oraz podgrzewacze rurowe

For recovering flash steam from condensate. The flash vessel allows the flash steam to separate from high pressure condensate.

Rozprężacz do odzysku ciepła

The boiler blowdown expansion vessels are designed for handling the short bursts of intermittent blowdown from the steam boiler and other hot water drains. They allow the flash steam to separate and to vent safely to the atmosphere through the exhaust head.

Separatory przedmuchu kotłów / Zbiorniki chłodzące

The exhaust heads were designed to protect personnel from injury and exterior of buildings from harmful effects of steam ejection to atmosphere. The head is fitted at the end of a vertical exhaust pipe and effectively retains the moisture separated from the steam for draining.

Głowice odpowietrzające

The Hot condensate coolers is a cooling device that allows the mixing of hot condensate with a lower temperature condensate, avoiding hammering. Condensate discharge from higher pressure lines (drip points, for instance) is often connected to low-pressure condensate lines, with lower temperatures.

Chłodnice gorącego kondensatu

The condensate lifting pots particularly used in condensate lines where condensate must be transported without causing water hammers and noise and lifted to elevated condensate mains.

Tłumiki uderzeń wodnych w instalacji kondensatu

Fabricated packages refer to pre-assembled, custom-built valve systems that combine multiple components—such as valves, actuators, sensors, piping, and control accessories—into a ready-to-install skid or unit.

Rozwiązania systemowe i modułowe dla pary i kondensatu

Designed to allow the placement of supply valves in a single location, reducing costs and providing an easy control of different lines.

Distribution manifolds